Thursday, April 11, 2013
Sunday, April 7, 2013
First batch of beer: Ahab's Stout + Recipe
Posted by
Vinny
Here begins our adventures making beer. My roommate and I agreed to start making beer at the start of spring. So we traveled to the homebrew store to acquire some ingredients to make a stout. We decided to make a stout because that is what we agreed on (we were also told that if we messed up clarifying the beer, it would be harder to detect). The recipe I got from the store seemed better than the one I had gotten from a book, but only because their recipe had everything that we needed in the store.
| We named her "Big Bertha" |
Saturday, April 6, 2013
My New Hydroponic setup (Kratky method)
Posted by
Vinny
One of my spring break projects was the construction a hydroponic system to utilize more growing space available in my apartment. The lower balcony is getting significantly more sun than in winter so I figure it is time to start using it again.
For starters, I originally planned to make a float system out of a nice desk table I found on the side of the road. I gave up on that idea because 1) It seemed more difficult than it needed to be. 2) Gathering the wood and other materials required multiple trips 3) It was a nice desk, and the apartment needed more work space (I'm using the desk right now as my table).
| Completed system with new plants |
Thursday, April 4, 2013
Building a blower
Posted by
Diecaster D.
Pictured above is the old blower I was experimenting with for the foundry. It was clearly too strong for the application so I sold it and bought a motor of less power, 1/3 horsepower as opposed to 1HP.
Here is the shell of the new blower being welded. There is a large diameter pipe section 4" long sandwiched in between the sides to maintain uniform depth. The pipe clamp is being used to hold the outside piece for tack welding. The top side pictured was welded all the way around, and the bottom was only tacked because it was later ground off. The circular parts were cut with a Beverly shear.
Here is the shell of the new blower being welded. There is a large diameter pipe section 4" long sandwiched in between the sides to maintain uniform depth. The pipe clamp is being used to hold the outside piece for tack welding. The top side pictured was welded all the way around, and the bottom was only tacked because it was later ground off. The circular parts were cut with a Beverly shear.
Tuesday, April 2, 2013
Scarlet Nantes Carrot
Posted by
Vinny
Carrots can be fun and rewarding to grow. In my opinion though, if you have little space in your garden, grow a different plant. It's cheaper to buy carrots in the store, as your own homegrown ones might not always be up to the quality of store bought ones.
Plus, if you harvest your carrot prematurely, that's it. There is no replanting a pulled carrot. Additionally, you only get 1 carrot for each seed (who would have known). I recommend planting a leaf vegetable or herbs in place of carrots. But don't listen to my advice if you have a special heirloom variety of carrot like a purple or red one.
Plus, if you harvest your carrot prematurely, that's it. There is no replanting a pulled carrot. Additionally, you only get 1 carrot for each seed (who would have known). I recommend planting a leaf vegetable or herbs in place of carrots. But don't listen to my advice if you have a special heirloom variety of carrot like a purple or red one.